Ranger DST64T: DST-64T Digital Wheel Balancer with DataWand™ Entry
The DST64T’s Drive-Check technology dramatically improves rotational measuring typically used to diagnose and repair ride disturbance complications. The highly precise DST64T performs a computer generated driving simulation then checks and measures the tire / wheel assembly for imbalance and possible runout of the rim and tire. With the DST64T, virtually all possible complaints due to rotational imbalance are eliminated before the wheel is mounted on the vehicle.
Automatic Wheel Data Entry:
Our revolutionary DataWand™ and inner data set arm allows you to quickly and automatically enter all wheel parameter settings in less than three seconds; wheel diameter, wheel width, offset distance and targeted weight placement positioning for exact balancing every time. The parameter values are automatically entered into the wheel balancer by a single simultaneous maneuver of the extendible and storable DataWand and inner data set arm reducing set-up times and eliminating opportunities for human error. The DataWand also features a built-in tape weight holder that aids with tape weight placement and positioning at precise locations.
Inner Wheel Target Lighting:
The DST64T incorporates a brightly displayed light-emitting diode (LED) inner wheel target light that automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.
The DST64T automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line.
Motor: 1.5 HP, 208-230V, 50/60HZ 1Ph.
Working Temperature: -5C / 27F to 50C / 82F
Drive System: Serpentine Poly-V belt
Cycle time: 6-12 seconds (avg.) Depending on Wheel
Balancing Modes: 1 Dynamic / 2 Static / Multi-Variable Alloy
Top Positioning Weight Locator: Standard
Inside & Outside Measuring: Standard
Millimeter / Inches Selection: Standard
Ounce / Gram Selection: Standard
Hidden Weight Function: Standard
Match Mount Function: Standard
Wheel Offset Distance Data Entry: Automatic
Wheel Diameter Data Entry: Automatic
Wheel Width Data Entry: Automatic
Self-Calibration Function: Standard
Auto Start When Hood is Lowered: Auto Start or Manual Start
Wheel Spin Braking: Automatic / Pulse Electronic
Wheel Restraint Pedal: Standard
Centering Cones Included: 3 Auto & Light Truck / 1 Medium Truck
Wheel Calipers: Standard
Rear Cone Mount Spring: Standard
No-Mar Rear Cone Mount Pressure Cup: Standard
Quick-Release & Mount Hub Nut: Standard
Maximum Tire Diameter: 50″ / 1270 mm
Max Tire Weight: 150 pounds (68 kg)
Max. Wheel Diameter: 10” – 30″ / 254 – 762 mm
Wheel Width Capacity: 1.5″ – 20″ / 38 mm – 508 mm
Balancing Increments: 0.25 or 0.01 ounce
Balancing Speed: 180 RPM
Accuracy: +- .5 Gram / .025 Oz.
Resolution: (Round Off Mode) 5 Gram / .25 Oz.
Shipping Weight: 498 pounds / 226 kg.
Unit Dimensions: / Width – Depth – Height [46” 1168 mm] [31” 787 mm] [56” 1422 mm]
Space Required: / Width – Depth – Height [60” 1524 mm] [50” 1270 mm] [60” 1524 mm]
Highly precise 64-bit architecture and single‐chip technology. Precision DataWand™ and inner data set arm allows you to quickly and automatically enter all wheel parameter settings in less than three seconds.
Serpentine poly-V belt features a polyester-aramid fiber composite core to resist degradation of functional performance under extreme operating conditions. Poly-V belt mates perfectly with motor and spindle sheave for continuous tension and distribution.
(1) Dynamic, (2) static, (1) standard alloy and variable alloy setting that enables you to select the exact weight placement location you choose for the specific wheel being serviced. Easily configured with the simple push of a button for a variety of wheel styles and designs.
Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors.
Low RPM balancing speed and rapid six-second cycle time.
Gram/ounce selection and millimeter/inch selection
An audible alarm and brightly displayed LED’s identify exact weight amounts and precise positioning for perfect balancing.
Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques.
Wheel restraint pedal secures wheels at precisely 12-o’clock for easier servicing and proper weight placement.
LED inner wheel target light automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.
Manual or automatic start when hood is lowered
Self calibration function
High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools.
Precision-machined, hardened-steel 36-mm shaft (ACME thread 30-degree 3-P).
Quick-release hub nut for dramatically reduced set-up times
Side cone storage pegs keeps mounting cones readily available
Open-sided hood design allows for a broader coverage of tire shapes and sizes
Wheel Weight Starter Kit – Free samples of Ranger steel wheel weights are included. Starter Kit includes; one bulk roll of 100 silver adhesive steel tape weights, one bulk roll of 100 black adhesive steel tape weights, and one starter box of mixed clip-on steel weights.