CL7P

$5,072.00

Challenger Lifts CL7P Asymmetric Fixed Pad 2-post lift w/ fixed pad ramps mounted on CL10series, mechanical lock release (11' 11″ ht. at full stroke). Includes set of four rubber spotting blocks (#63100). Fixed drive-on style pad provides quick vehicle spotting for express bays Padded overhead shut off system prevents vehicle damage Optional Tire Hanger Kit allows tires to be stowed at an ergonomic height for quick access. Front tires are stored on lift column mounted rod and rear tires on rear pad tire hanger Single-point mechanical lock release system allows technician to disengage both column locks simultaneously Grease fitting located on arm pin bushings minimize corrosion to keep arms swinging freely Optional Dual Pendant Control allows technician to control lift with an unobstructed view to vehicle lift points 48″ elongated carriage design decreases load on bearing Interchangeable pad to swing arm design Heavy-Duty 5″ diameter pulley and 5/16″ cable reduces stress on equalization system and increases cable lifeCLFP9

PDF Catalog Sheet
Purchase this product now and earn 5,072 Points!
SKU: CL7P

Product Description

Challenger Lifts CL7P Asymmetric, Fixed Pad Drive-On Style, Two Post Car Lift 7,000 lb

Asymmetric Fixed Pad Drive-On style two post car lift features fixed pad ramps mounted on our CL10series two post automotive lift. Comes standard with (4) two position adapter blocks.

Perfect for quick vehicle spotting and express service such as quick lubes, tire rotations and balancing, brake work and other general service when productivity is essential. CL7P car lifts expedite brake and tire work with an optional heavy-duty Tire Hanger Kit which allows tires to be stowed at an ergonomic height for quick access.

Interchangeable pad to swing arm design allows you to easily remove the fixed pads and replace them with optional Versymmetric® swing arms. Optional swing arms for CL7P car lifts available in 2 productivity configurations:
Maximum Productivity – Versymmetric® Plus offset 3-stage front + 3-stage rear arms with double telescoping screw pads or
Complete Productivity – Versymmetric® offset 2-stage front and rear arms
with double telescoping screw pads
Other standard features include Heavy-Duty pulley and cable equalization system, 48″ elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release system and padded overhead shut off system.

Lift Capacity
7,000 lbs.
Width
11′ 6-1/2″
Height
11′ 11″
Max Rise
70-3/4″
Lifting Time
48 seconds
Motor
2HP
Rubber Pad Min
2-3/4″
Manufacturer
Challenger

Additional Information

Lifting Capacity

Min. Pad Height

4"

Motor

Rise

Rise Time

Challenger Lifts CL7P Asymmetric Fixed Pad 2-post lift w/ fixed pad ramps mounted on CL10series, mechanical lock release (11′ 11″ ht. at full stroke). Includes set of four rubber spotting blocks (#63100). Fixed drive-on style pad provides quick vehicle spotting for express bays Padded overhead shut off system prevents vehicle damage Optional Tire Hanger Kit allows tires to be stowed at an ergonomic height for quick access. Front tires are stored on lift column mounted rod and rear tires on rear pad tire hanger Single-point mechanical lock release system allows technician to disengage both column locks simultaneously Grease fitting located on arm pin bushings minimize corrosion to keep arms swinging freely Optional Dual Pendant Control allows technician to control lift with an unobstructed view to vehicle lift points 48″ elongated carriage design decreases load on bearing Interchangeable pad to swing arm design Heavy-Duty 5″ diameter pulley and 5/16″ cable reduces stress on equalization system and increases cable lifeCL7P

Reviews

There are no reviews yet.

Be the first to review “CL7P”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest