Atlas® PV-10HP Clear Floor Two Post Lift, Adjustble Height, Extra Tall, 10,000 LB
The Atlas® PV-10HP is the taller version of the Atlas® PV-10P two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas® PV-10P. The taller position of the over head beam allows the Atlas® PV-10HP above ground hoist to lift “taller vehicles”. The Atlas® PV-10P and Atlas® PV-10HP are capable of lifting a vehicle a full 79″. However, some cube vans, “ladder trucks” and other vehicles that are exceptionally tall, cannot be raised to the full lifting height on the Atlas® PV-10P two post above ground hoist. The over head beam on the Atlas® PV-10P two post lift would prevent the “top” of the vehicle to be raised past 11′ 8″.
Atlas PV-10HP Clear Floor Two Post Lift, Adjustble Height
The Atlas® PV10HP is identical to the PV10P, but with a two foot (24) column extension. It is a commercial grade two-post lift designed to lift a wide variety of vehicles. Both the PV10P and PV10HP have a low pad height to accommodate passenger vehicles but are built to handle full size pickups. The PV10HP has dual direct drive cylinders and single-point lock release.
The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bullet-proof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models. GET SERIOUS…GET ATLAS®
The Atlas® PV-10HP includes a two foot extension kit ( longer hydraulic hoses, longer aircraft quality cables, taller beam extensions) that extend the height of the overhead beam (which connects both columns) an additional two feet. (24 inches) Please remember that you must have a ceiling height of fourteen (14) feet to install the Atlas® PV-10HP above ground lift.
Direct Drive Cylinders
Single-Point Lock Release
Front Arms May Be Configured Symmetric
Padded Shut-Off Bar
Powder Coat Finish
Clear Floor Design
Free Truck Adapters
5-Year Structural, 2-Year Power Unit Warranty
Capacity 10,000 lb.
Overall Height 166″ (13’ 10”) 170″ (14’ 2”)
Overall Width 137 3/8” (11’ 5 3/8″)
Outside Column To Outside Column 125” (10’ 5”)
Maximum Lift Height 79” (6’ 7″)
Minimum Pad Height 4”
Between Columns 110 3/4” (9’ 2 3/4”)
Drive Thru Symmetric / Asymmetric Configuration 96″ (8’) / 90″ (7’ 6″)
Height Shut-Off 136” (11’ 4”) 140″ (11’ 8”)
Motor/Electrical Requirement 220 Volt, Single Phase;
A 30 amp Breaker Is Recommended.
Shipping Weight 2,100 lb.
|Min. Pad Height||
|Width Between Post||
|Overall Height: 2 settings||
1) 166″ (13’ 10”) *** 2) 170″ (14’ 2”)
|Outside Column to Outside Column||