RANGER RS-750 PROFESSIONAL SPRAY WASH CABINET WITH SKIMMER
When you’ve got something big and dirty, clean it better with Ranger. This powerfully versatile, 53-gallon capacity spray wash cabinet degreases even your filthiest car parts in no time flat. Comes with free bucket of soap. Each RS-750 is equipped with a large, 30″ diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. Durable construction combined with simple operating controls, brass nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.PDF Catalog Sheet
Each RS-750 is equipped with a large, 30″ diameter turntable that can carry a payload up to 1,000 lbs. Like all Ranger spray-wash cabinets, the RS-750 is built to last. We constructed this cabinet and door with heavy-duty 12-gauge steel and then coated it with an industrial two-step primer and powder coat finish. Durable construction combined with simple operating controls, brass nozzles, a gasket-free door and a large, 70-gpm pump make the RS-750 tough enough to take on the heaviest, dirtiest auto parts you can find.
Movable filter basket
Each component washer cabinet by Ranger includes a robust trap filter to secure large particles greater than 1/8″. Filter basket is removable for unfettered access to the cleansing solution tank and easy maintenance.
Industrial-strength multi-directional spray jets are located below, above and on the sides to wash away set-in grime.
Steel oil skimming system
Parts washers by Ranger include a stainless-steel oil skimmer that miraculously separates oil and grime from the water to increase the viable longevity of the detergent solution cleanser. Oil and other contaminants are directed via downspout into holding containers.
Fast-release door latch / gasket-free door
Swift-release door latch is built-in for technician convenience. The gasket-free interlocking door keeps the cleanser material free from contaminants in the tank instead of on your floor.
Instead of pipe-tree and drilled holes, Ranger parts washers include replaceable spray nozzles made of brass. These sprayer nozzles have a sharply articulated spray grid to give users a high-quality cleaning experience and great performance free from corrosion.
The system behind the parts washer turn table is friction-drive, helping to eliminate potential motor damage by reducing the risk of component jamming inside the cabinet.
Industrial casters and convenient tank drain.
Heavy-duty rubber swivel casters provide sensible maneuverability. Ranger components washers include built-in pipe drains to eliminate sludge from the floor of the parts washer tank.
Safety switch and timer dial
A door switch turns off the washing cycle when the door is opened, while a variable 60-minute timer allows for different wash cycle times to be set manually.
Removable tree rack and components basket
The quick-mount parts tree rack and hanging component parts basket is ideal for the cleaning of smaller components. Use the parts tree and basket in conjunction with parts on the turntable and you’ll tackle more parts cleaning in less time. The center tree rack can be easily removed to provide additional clearance.
Heavy-duty steel construction
Removable tank screen
Stainless oil skimmer
Removable parts tree
Powder coat finish
Full opening octagonal door
Large drain pipe
Heavy-duty rubber casters
Friction-drive turntable system
Small parts basket
Stainless steel handles
Removable parts tree
Free bucket of soap included
Overall height: 78″ / 1,981 mm
Inside height: 54″ / 1,372 mm
Inside width: 32″ / 813 mm
Turntable diameter: 30″ / 762 mm
Tank capacity: 53 gallons
Recommended floor space: 44″ x 43″ / 1,118 mm x 1,092 mm
Load capacity: 1,000 lbs. / 454 kg
Cycle Timer: 0 – 60 minutes
Brass Nozzles: 22
Steel construction: 12 Gauge / .109 thickness
Pump output: 70 psi @ 70 gpm
Motor: 1 Hp / 220 VAC / 60 Hz / 1 Ph
Electric heater: 6 kW
Water Temperature: 175° F
Shipping weight: 960 lbs. / 435 kg
Shipping dimensions: 36″ x 44″ x 68″ / 914 mm x 1,118 mm x 1,727 mm
|Weight of Product||
Overall height: 78" / 1,981 mm
30" / 762 mm
70 psi @ 70 gpm
1 Hp / 220 VAC / 60 Hz / 1 Ph