BendPak 1302 Automatic with 202 Die Package 1302BAS-202
The BendPak 1302BAS-202 is a powerful semi-automatic exhaust pipe bender designed to expedite any bending process and bring an extra level of precision to your workshop.
Consider the semi-automatic BendPak 1302BAS-202 exhaust pipe bender with side-loading sager. We equipped an already top-notch model with an automatic control board and located it up front for your convenience. Hit the green button for fully automatic bending functions, blue for initiating an automatic return sequence and red for stop. It’s that simple. And for an added bit of sophistication, we’ve also included a remote electric foot switch, so you can control basic bending operations even if you’re handling larger tubing 4′ away.
Quick-change bending dies
Who has time to waste? Not you. Especially when you have a car in the air and others lined up. Our competitors tried for years to come up with an effective way to swiftly switch out the bending dies. But BendPak actually did it. Our twist-lock tooling and quick-change bending dies are so effective that they are copied across the entire industry. We choose to think of imitation as the best form of flattery, but you should make sure that you get your innovative equipment from the originator and not a knock-off.
180° bending capacity
You told us you needed a bender with an extremely deep bending capability. Is a U-shape deep enough? Thought so. Be sure to ask for our 180° dies if you’re planning to bend more than 170°. You’ll get perfect deep bends on a 5″ radius, without pipe sticking or hang ups. That’s because we use an exclusive relief cut design on our bending dies to help maintain the pipe’s uniformity throughout the bend cycle and eliminate excessive crimping or deformation.
3″ bending capacity with die kit
We built a convenient 3″ bending capacity into every BendPak bender. In fact, our 3″ bending dies perfectly exemplify our commitment to quality. Take a close look at the design. They might look like ordinary bending dies, but these heavy handfuls are anything but. No other manufacturer uses our exclusive step-cut process for the die rails. Our dies feature better-contained large-sized tubing and a more uniform bend. Despite the title of “bender,” this unit is actually capable of expanding and flaring too! With a full range of dies to choose from, your big tubing jobs just got a whole lot smaller.
Long-stroke bending cylinder
Because every BendPak bender is equipped with an extended-top cylinder, you no longer need to use pusher block extensions when bending with small-radius dies. Also, the 14″ top-cylinder can be retracted further, providing additional clearance for changing dies or removing bent tubing.
BAS three-button control
An automatic control board, safely enclosed within the front upright of the bender, is located up front for operator convenience. The green button is used for full automatic bending functions, the blue button for initiating an automatic return sequence and the red button for automatic stop. The depth-of-bend plate is equipped with an adjustable slide pointer that can be preset to stop at any desired bend depth.
2 separate end-finishing units at rear for all necessary flaring and expanding
3-button control for automatic or manual bending operations
202 Standard Tooling Package included
Comes complete with quick release bending and finishing dies
Includes high-speed clampless swager and internal expander
Easy-to-use drop-in collar makes swaging operations quick and efficient
Integrated power-relief control valve
Pass-through cylinder stem passes completely through the primary frame
Rigid 6″ x 6″ x 3/8″ welded-steel tube frame
Commercial-grade hydraulic cylinders
All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards
Quick-release bending dies for reduced set-up times
Bending heads precision grounded to within .002″
Enclosed controls keep your bending area clutter-free
2-1/2″ oversized barrel shafts for maximum dependability and minimum maintenance
Standard grease fittings allow for simple lubrication
NEMA rated on / off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur
Pressure gauges let you know exactly what the system pressures are at all times
Industrial grade casters help you easily move the bender around your shop
Remote foot operated controls for added long-distance control
Adjustable pressure valve located right up front
One piece barrel ensures that the bending gates stay perfectly aligned with the ram
Heat-treated tooling for greater service life
Convenient tool trays keep your tooling organized
Strong, 5 Hp Baldor energy efficient motor delivers maximum performance
Direct-drive, high-speed, 4 gpm pump
Single enclosed bottom cylinder applies pressure evenly to the back gates and, because it is hidden, does not interfere with the tubing
Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination
Canister oil filter in the hydraulic system keeps the oil nice and clean
Oil sight-gauges allow you to visually inspect oil levels
Bending controls: semi-automatic / 3-button control
Expander controls: manual / knee lever
Frame style: 1302 / double-ended expander
Maximum bending radius: 5″ / 127 mm
Minimum bending radius: 3-1/3″ / 89 mm
Maximum tube capacity: 3″ / 76 mm / .095 wall
Standard die pack (202): 1-1/2″, 1-3/4″, 2″, 2-1/4″, 2-1/2″
Top cylinder working force: 60,000 lbs. / 27,216 kg
Hydraulic filter: canister
Dimensions: 41″ x 64″ x 26″ / 1,041 mm x 1,626 mm x 660 mm
Standard motor: 5 Hp / 208 – 230 VAC / 60 Hz / 1 pH
Shipping weight: 1,282 lbs. / 582 kg
Shipping dimensions: 48″ x 70″ x 30″ / 1,219 mm x 1,778 mm x 762 mm