NESHAP Cross Flow Sanding Booth CF1000-NSB

$16,797.00

This sanding booth gives you plenty of room to prep and sand, 14’W X 9’H X 26’L, it can fit a car with ease.

Purchase this product now and earn 16,797 Points!
SKU: CF1000-NSB Categories: , Brand:

Reviews

There are no reviews yet.

Be the first to review “NESHAP Cross Flow Sanding Booth CF1000-NSB”

Your email address will not be published. Required fields are marked *

Product Description

NESHAP Cross Flow Sanding Booth CF1000-NSB

Full size enclosed sanding booth with NESHAP 3-Stage Filtration, 14’W X 9’H X 26’L, based on the popular cross flow booth design. Filtered doors, double fans, filtered exhaust wall and two MERV filter boxes for recirculated air, this new model booth is an added benefit for body shops!

Since sanded particles are typically larger and heavier than paint overspray, this 3-stage NESHAP sanding booth from Standard Tools and Equipment Co. is designed with greater airflow to move the particles through all three filters.

Large Full Size Enclosed Booth: This sanding booth gives you plenty of room to prep and sand, 14’W X 9’H X 26’L, it can fit a car with ease. As an enclosed booth, it keeps all of the sanding debris inside your work area and exhumes it out through the filtration media.

No Wall Cutting. No Duct. Re-circulated Air: Designed to be a stand-alone unit, this booth does not require duct penetrations on the building.

3-Stage NESHAP Filtration: This booth’s 3-stage filtration captures high volumes of dust, with up to 99.9% filter efficiency at 5 microns. Dust is filtered out through our blanket filter media, then through bag filters and finally through the double final stage filter boxes, rated at MERV 11 The air can then be re-circulated through the booth with clean air entering through the filtered doors.

Fans: It’s important to get enough airflow in a sanding booth. This booth is equipped with two 24” Fans. (3HP / 3PH MTR / 9332 CFM).

Electrical: Available in single-phase or three-phase. Comes with a control box to control the fans and lights from one location.

Lighting: This sanding booth comes with 10 light fixtures (2’ X 4’) for florescent T8 bulbs.

Filter Maintenance:
Comes with a complete set of filters and a manometer to indicate when the filters need to be replaced. When your filters are full, you can contact us to order your replacement filters.

Powder Coated Finish: This sanding booth comes in a sharp white durable powder-coated finish, inside and outside the booth.

Easy Access: Entrances to this booth include the tri-fold filtered entrance doors (10′ W x 9′ H ) or the personnel door with large clear tempered glass viewing window.

Compliant: Our products meet or exceed all of the applicable codes related to the equipment.

Want even better lighting? Ask us about our new LED flat panel lights that can be upgraded in this booth model!

Additional Information

Weight 4500 lbs

Pin It on Pinterest