Revolution Storage Four Post Parking Lift With Caster Kit RFP8
The RFP8 is the most versatile tool in your garage. Use it to store your classics or your daily driver and your project car. With the optional platform kit, you can easily store lawnmowers, ATVs, jet skis or motorcycles. The possibilities are endless and it’s a whole lot less expensive than building a new garage. Don’t want to stack your vehicles? No problem. With multiple locking positions and clear center access and the included caster kit you can work on your car at any height and nearly anywhere in your garage. You won’t know what you did without it!
Revolution Storage Four Post Lift Portable RFP8
The RFP8 is the perfect solution if your garage is tight on space. Removable ramps and multi-position locks add even more flexibility when space and overhead clearance is a concern.
The Revolution RFP8 is quality tested, third-party certified and value priced for your personal storage or independent repair use.
72-1/2″ Lifting Height with 68” under runway clearance
Single point lock release
Adjustable lock ladder allow runways to be level at any lock position
Multi-position locks gives the convenience of working at any height
Standard 115V power
1) Three (3) Drip Trays
2) One (1) Jack Tray Included – For use with hydraulic bottle jack
3) Polymer Caster Kit Included – for moving lift around when unloaded
About the Manufacturer
Revolution Lift’s manufacturing facilities are ISO 9001 compliant. Holding this quality certification means our lifts are manufactured to the highest quality standard in the industry.
All of Revolution’s two and four post lifts are ALI (Automotive Lift Institute) certified, and have received ALI/ETL approval. To achieve certification, each lift model must meet ANSI standards and be third party tested and validated by an accredited independent testing company. Read more about ALI certification here.
When you purchase a Revolution lift, you are also getting the largest and most experienced service and support network in the industry. Revolution Lift stands behind their products long after the sale with the industry’s most experienced technical and support network available.
Capacity 8,000 lbs. (3629kg)
Rise 72-1/2” (1842mm)
Overall length with approach ramps 207-1/2” (5270mm)
Overall length without approach ramps 175 -1/2” (4458mm)
Overall width w/o motor 103 -1/2” (2629mm)
Approach ramp Length 32” (813mm)
Runway width 18 -1/2” (470mm)
Runway length 169 -1/2” (4305mm)
Runway height 4 -1/2” (114mm)
Height of columns 81 -1/2” (2070mm)
Clearance between columns 94” (2388mm)
Clearance between runways 38” (965mm)
Outside runway to outside runway 75” (1905mm)
Clearance under runway 68” (1727mm)
Motor specs 110VAC, 1HP
|Height of columns||
81 -1/2” (2070mm)
|Overall width w/o motor||
103 -1/2” (2629mm)
|Clearance between columns||
|Overall length with approach ramps||
|Overall length without approach ramps||
175 -1/2” (4458mm)
169 -1/2” (4305mm)