Challenger Versymmetric Dual Pendant Two Post Lift CL10V3-DPC

$4,949.00

Challenger Lifts CL10V3-DPC Versymmetric® 2-post car lift w/ Dual Pendant Power Controls directSPOT™, offset 3-stage front & rear arms & dual single-point mechanical lock release. Includes Stack Adaptor Kit (Part #10315), Document Caddy (Part #10320) and Pendant Holder (Part #10321), (11′ 11″ ht. at full stroke) (Single phase only). Versymmetric® offset front arms provide directSPOT™ to vehicle lift points and safely lifts both symmetrically and asymmetrically within the same service bay maximizing service capabilities and revenue potential. Padded overhead shut off system prevents vehicle damage from being raised too high Oversized 5″ diameter pulley and heavy duty 5/16″ cable reduces stress on equalization system and increases cable life. Fully gusseted base plate design reduces column deflection. 48″ elongated carriage design decreases load on bearing. Single point mechanical lock release system with jacket coated protection and no lock cable pulleys, and double clutch release bar protects cable from stretching while disengaging both column locks simultaneously. 11′ 8″ standard height with 2′ and 3′ extensions available allows lift to be placed in standard service bay with 12′ ceiling. Rubber door guards provide added security against vehicle door damage.

Purchase this product now and earn 4,949 Points!
SKU: CL10V3-DPC Categories: , Brand:

Product Description

Challenger Lifts CL10V3-DPC Versymmetric® Plus, Dual Pendant Controls, Two Post Car Lift 10,000 lb

Service more vehicles and make more money with the Versymmetric® and Versymmetric® Plus CL10series 2 post lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift cars, trucks, vans and SUV’s symmetrically or asymmetrically within the same service bay, within rated capacity.

CL10 series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT™ to the vehicle’s lifting point without having to re-position the vehicle or shuffle back and forth to reach its recommended lift points.

WHAT IS: Max Plus Productivity Dual Pendant Power Controls, Stack Adapter Kit and Document Caddy with Versymmetric® Plus offset 3-stage front + 3-stage rear arms
CL10V3-DPC:
Always within technician reach when small spotting adjustments matter the most,
dual pendant power controls expedites vehicle spotting by providing an unobstructed view to lifting points OSHA compliant keyed lockout safety button locks out power to the lift. Up power button raises lift. Down power button / dual single-point mechanical lock release system lowers lift from either column.

Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, 48″ elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off.

LIFT CAPACITY 10,000 lbs.
WIDTH 11′ 6-1/2″ / 11′ 11″ 11′ 11″
HEIGHT 11′ 8″
MAX RISE 74-1/8″
LIFTING TIME 48 seconds
MOTOR 2HP
REACH ARM MAX FRONT 42″
REACH ARM MIN FRONT 19-13/16″
REACH ARM MAX REAR 60″
REACH ARM MIN REAR 37-5/8”
RUBBER PAD MIN min 3-7/8″ Max 6-1/2″
MANUFACTURER Challenger

Additional Information

Lifting Capacity

Min. Pad Height

4"

Motor

Rise

Rise Time

Overall Height

Reviews

There are no reviews yet.

Be the first to review “Challenger Versymmetric Dual Pendant Two Post Lift CL10V3-DPC”

Your email address will not be published. Required fields are marked *