BendPak Alignment Closed Front Heavy Duty Four Post Lift HDS18EA

$14,660.00

HDS-18EA 18,000-lb. Capacity Alignment, Standard Four-Post Truck Lift

BendPak’s newest line of heavy-duty four-post truck alignment lifts are here. Bigger sheaves, beefier components and a legacy of dependability–get your hands on these massive machines and bring a higher level of service to all your alignment projects. Adjustable leveling, integrated front radius plates, and rear slip plates make HDS alignment lifts ready and compatible with all leading alignment-ready and compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.

PDF Catalog Sheet
Purchase this product now and earn 14,660 Points!
SKU: 5175181 Categories: , Brand:

Product Description

BendPak’s HDS-Truck Series alignment-ready four-post lifts are a whole new breed of rugged. These newly engineered heavy-duty truck lifts make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability and productivity. Five models provide a generous 18,000, 27,000, or 25,000-lb. lifting capacity and feature extra-wide runways to accommodate a wide variety of vehicle configurations.

Adjustable leveling, integrated front radius plates, and rear slip plates make HDS alignment lifts ready and compatible with all leading alignment-ready and compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.

Looking for even more lifting and alignment capabilities? Check out the 27,000-lb. capable. HDS-27A and HDS-27XA, as well as the the HDS-35A and the HDS-35XA alignment automotive lifts by BendPak.

All HDS-18EA standard length truck alignment lifts feature:

Multi-caster slip plates in the back and turn plates in the front allow for extremely precise, free-floating alignment.
Multiple turn plate pockets let you position the turn plates in the location best suited to individual vehicle positioning–provides for more clearances related to allowable equipment installations.
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
Supersized 12″ diameter cable sheaves within the runway and cros tubes combined with massive 4″ diamater sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll increase safety and spend less money in service related expenses down the road.
BendPak’s HDS-Truck Series lifts feature four stainless-steel lifting cables that provide great balance between abrasion resistance and fatigue.
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.

Each HDS-Truck Series four-post lift is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-durometer rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service. Leak proof cylinder technology only available for BendPak four-post lifts

An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.

Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.

Features multiple adjustable height locking positions for variable-height parking and infinite leveling.

A maintenance-free electric hydraulic power system assures ultimate dependability.

All operator controls are conveniently located within easy reach.

12″ x 12″ base plates provide a solid foundation.

Non-skid runways provides maximum grip, even when the runway surface is wet or oily.
Optional rolling jacks make a great addition to increase service capacity. Rolling jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and break service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump

Lifting capacity: 18,000 lbs. / 8,165 kg
Front axle max capacity: 9,000 lbs. / 4,082 kg
Rear axle min capacity: 9,000 lbs. / 4,082 kg
Overall width: 154″ / 3,912 mm
Outside length: 257″ / 6,528 mm
Overall length: 297″ / 7,544 mm
Height of columns: 93″ / 2,362 mm
Min runway height: 10-1/2″ / 267 mm
Max rise: 60″ / 1,524 mm
Max lifting height: 70-1/2″ / 1,791 mm
Width between posts: 134″ / 3,404 mm
Runway width: 22″ / 559 mm
Width between runways: 38″ – 56″ / 965 mm – 1,422 mm
Length of runways: 263″ / 6,680 mm.
Min 4-wheel alignment: 83″ / 2,108 mm
Max 4-wheel alignment: 138″ / 3,505 mm
Max 2-wheel alignment: 211″ / 5,359 mm.
Min wheelbase @ rated capacity: 185″ / 4,699 mm
Min wheelbase @ 75% capacity: 160″ / 4,064 mm
Min wheelbase @ 50% capacity: 135″ / 3,429 mm
Min wheelbase @ 25% capacity: 110″ / 2,794 mm
Locking positions: 9
Lock spacing: every 6″ / 152 mm
Lifting time: 75 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

18,000-lb. lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Multi-caster slip plates
Spring-loaded automatic safety locks
Supersized 12″ diameter cable sheaves
Four stainless-steel lifting cables
Grease nipples on every sheave and axle
Single hydraulic under-runway cylinder
Integrated hydraulic flow restrictor
Durable powder coat finish
Push-button pneumatic lock release
Secondary lock system on constant guard
Enclosed cables, airlines, safety latches
Multiple adjustable locking positions
Maintenance-free power system
Conveniently located controls
12″ x 12″ base plates
Non-skid runways
Optional rolling jacks available

Additional Information

Lifting Capacity

Motor

Rise Time

Inside Columns

134"

Overall Width

154"

Height of Columns

93"

Length of Runways

263"

Overall Length (including drive up ramps)

297"

Outside Length (base plate to base plate)

257"

Max Rise (underneath runway)

60"

Reviews

There are no reviews yet.

Be the first to review “BendPak Alignment Closed Front Heavy Duty Four Post Lift HDS18EA”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest