MAHA Double Scissor Lift Full Rise Twin 9000 VP 250162
The TWIN 9000 double scissor automotive provides quick lube stations, car dealers and automotive workshops with an auto lift capable of servicing a wider range of vehicles faster and safer than any other double scissor lifts on the market.
The TWIN 9000 lifts vehicles weighing up to 9,000 pounds with strength and durability.
Smooth extension and retraction when fully lowered. Raising lever allows full lifting force in the lowest height range.
Unlike the competitor’s systems, the TWIN 9000 automotive lift does not require manual synchronization. It uses a two cylinder system with a cable pull potentiometer that electronically measures cylinder movement and automatically equalizes the travel of each runway.
Synchronized Redundant Safety System
The TWIN IV does not require manual synchronization. It uses a two cylinder system with a cable pull potentiometer that electronically measures cylinder movement and automatically equalizes the travel of each runway during entire lifting and lowering procedure.
Each scissor is equipped with a synchronized redundancy system that increases reliability and safety through years of tough, demanding use. An acoustic signal control (CE-Stop) provides crush/pinch protection and every TWIN is equipped with an emergency shut off function. Pipe breakage safety function adds security in the lifting cylinders
Smooth extension and retraction when fully lowered. Full lifting force in the lower height range thanks to the innovative raising lever.
Vehicle Contact Protection
Various support blocks and optional polymer pads are available for safe lifting and vehicle underbody protection.
Lifting Capacity: 9,000 lbs.
Lifting Height: 79.75”
Lifting Time: 44 seconds (capacity 3,307 lbs)
46 seconds: (capacity 7,000 lbs)
53 seconds: (capacity 9,000 lbs)
44 seconds: (capacity 3,307 lbs)
Low Clearance: 5.2”
Length of Platforms: 61.25”-81.5”
Width of Platforms: 25.5” 25.5”
Total Width Recommended: 82.75” 82.75”
Motor Power: 2 HP
Fuse Protection: 20 A
Compressed Air Supply: Min. 90 PSI
Power Supply: 208/230 V 60 HZ 1-Phase
Shipping Weight: 2,700 lbs
MAHA’s product engineers designed the double scissor lift for trouble-free integration into daily workshop operations. Up to five TWIN 9000s install flush or surface mounted in the same space that would normally only support three 4-post lifts.
A 44-53 second lifting and lowering time (depending on load), increases turnaround time and revenue.
Constructed with no in-between connections, the TWIN 9000 runway allows technicians free access to perform all types of work.