Challenger Inground Two Post Car Lift Three Stage Arms EV1020

$8,755.00

The EV1020 inground car lift is the ultimate lift for upping productivity and meeting the demands of a service facility.

SKU: EV1020 Category: Brand:

Reviews

There are no reviews yet.

Be the first to review “Challenger Inground Two Post Car Lift Three Stage Arms EV1020”

Your email address will not be published. Required fields are marked *

Product Description

Challenger Inground Two Post Car Lift Three Stage Arms EV1020

Inground car lifts with superior arm sweep, the widest drive-thru in the industry plus more service bays (smaller footprint than surface car lifts) means even more revenue. EV1020 EnviroLift™ cassette-style inground lifts meet all the demands of a professional service facility.

With over 50% more bearing contact surface than competitor’s lifts, enhanced wipers both top and bottom and NEW larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable car lift resulting in increased productivity.

EV1020 services more vehicles with its double telescoping screw pads, 3-stage arms and wide drive-thru. These car lifts protect your investment and the environment with its fully contained polymer housing made from recycled plastic (No EPA concerns). It also creates a professional showroom style appearance with its open, aesthetically pleasing look.

 

Features & Benefits

  • 10,000 lb. lift capacity
  • 3-stage front and 3-stage rear arms provide access to the lift points of a wide range of cars and trucks, maximizing revenue potential
  • Also available with a drive-on style pad to aid in quick vehicle spotting for express bays
  • 8 1/2” diameter chrome pistons provide greater stability under load
  • Chrome non-breathing ram style cylinder provides for longer lift life
  • Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings
  • Long bearing contact provides increased stability
  • Mechanical lock engages every 3? allowing ergonomic working height for technicians to increase productivity and minimize fatigue
  • Stainless steel air lock release cylinder promotes longer working life with its corrosion resistant design
  • Fully-contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground
  • Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
  • 87″ drive-thru accommodates wider vehicles, minimizes tire damage and provides for easy drive-on
  • Quick Cycle™ models reduce vehicle travel time by 30 percent
  • Wide range of upgrades to further customize your fleet
  • Premium powder coat finish on bolsters and arms provides long-lasting durability

 

  • Car Lift Capacity,10,000 lbs. (4536kg)
  • Stroke, 68″ (1727mm)
  • A Rise Height, 174″ (1880mm)
  • B Width Overall, 110″ (2794mm)
  • C Drive-Thru Clearance, 87″ (2210mm)
  • D Reach (Arm Minimum), 19-5/8″ (498mm)
  • E Reach (Arm Maximum), 42-1/8″ (1070mm)
  • F Rubber Pad Adapter (Minimum) 23-7/8″(89mm)
  • G Rubber Pad Adapter (Maximum)23-7/8″ – 6″(98mm – 152mm)
  • Capacity (Per Arm), 2500 lbs. (1134kg)
  • Guide Plunger Diameter, 8 1/2″ (216mm)
  • Motor, 2HP
  • Voltage (Single Phase Std.)3, 208v-230v
  • Speed of Rise, 40 seconds
  • Air Required, 75-125 psi
  • Ceiling Height Required for EV1020 car lifts, 79″ (2007mm), plus height of tallest vehicle
  • Shipping Weight, 2950 lbs (1338 kg)
      • 1 Car Lift Rise Height is measured with superstructure in highest position.
        2 Specifications are listed without rubber pad, for measurements with rubber pad add 1-4″ (6mm).
        3 Optional 3 phase electrical also available. Specify at time of order.
        Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

    There are no products