BendPak Quatra™ Scissors Wheel Alignment Car Lift 12,000lb, XR-12000A


Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas

Purchase this product now and earn 17,945 Points!
SKU: 5175750 Categories: , Brand:

Product Description

BendPak Quatra™ Scissors Wheel Alignment Car Lift 12,000lb, XR-12000A

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Integrated recessed full-floating front radius plates and over-sized rear slip-plates
  • Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
  • Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps
  • Multi-position runway work steps
  • Non-skid runways provide sure grip for vehicles and technicians
  • Dependable electric/hydraulic power system
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls
  • Open front design with clear center, sides and rear
  • Multi-position automatic leveling system
  • Quad automatic safety locks with pneumatic push-button release
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
  • Lubricated-for-life bearings on all pivot points
  • Rugged steel legs and formed steel runways
  • Turned, ground, polished and hardened zinc plated axle pins
  • Grease nipples on all moving pins and bearings
  • High efficiency hydraulic power unit provides faster raising and descent times
  • Easy access to hydraulic/electrical components for simple routine servicing
  • Easy to use and understand operator controls
  • Power unit console with easy access front panel
  • Can be flush mounted or recessed
    The Quatra™ Series Pantograph Lifts from BendPak™ – Raising the Bar
    The distinctive Quatra™ series lifts by BendPak™ revolutionize the lifting industry by offering a 12,000-pound lifting capacity and a true vertical lift for a more compact footprint, better accommodating smaller service bays and work areas. Their unique quad-opposing pantograph scissors design eliminates restrictive arm structures found on other scissors car lift types that typically get in the way. Quatra lifts provide you with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work and work efficiently which increases productivity and most of all, your profits. No other scissors lift on the market offer the freedom that BendPak’s Quatra series lifts provide.

The extended length Quatra XR-12000A was designed for vehicle alignments and general service work and accommodate a wide variety of wheelbases. Integrated recessed full-floating front radius plates and oversized rear slip-plates enable you to perform four-wheel alignments on a full spectrum of vehicles ranging from full-size work trucks to modern mini cars. The Quatra XR-12000A is also compatible with all leading alignment instrumentation, including new 3D systems and camera type wheel aligners.

Lifting capacity: 12,000 lbs. / 5,443 kg
Overall width: 86″ / 2,184 mm
Overall length / approach ramps extended: 296-1/2″ / 7,531 mm
Overall length / approach ramps collapsed: 276-1/2″ / 7,023 mm
Overall length / approach ramps stowed: 242-1/2″ / 6,159 mm
Runway width: 24″ / 610 mm
Width between runways: 40″ / 1,028 mm
Length of runways: 219-1/2″ / 5,575 mm
Min. 4-wheel alignment: 87″ / 2,210 mm
Max. 4-wheel alignment: 160″ / 4,064 mm
Max. 2-wheel alignment: 194″ / 4,928 mm
General service wheelbase: 199″ / 5,055 mm
Min. runway height: 11-1/4″ / 286 mm
Max. rise: 68″ / 1,727 mm
Max. lifting height: 74″ / 1,880 mm
Min. wheelbase @ rated capacity: 155″ / 3,937 mm
Min. wheelbase @ 75% capacity: 135″ / 3,429 mm
Min. wheelbase @ 50% capacity: 110″ / 2,794 mm
Min. wheelbase @ 25% capacity: 90″ / 2,286 mm
Locking positions: 13″ apart
Standard Motor: 220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.


There are no reviews yet.

Be the first to review “BendPak Quatra™ Scissors Wheel Alignment Car Lift 12,000lb, XR-12000A”

Your email address will not be published. Required fields are marked *