BendPak Closed Front Alignment Four Post Lift HD-9AE

$5,160.00

The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems. Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment. Dual radius plate positions for better vehicle accommodation.

PDF Catalog Sheet
Purchase this product now and earn 5,160 Points!
SKU: 5175820 Categories: , Brand:

Product Description

The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.
Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
Dual radius plate positions for better vehicle accommodation.
Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
Dual-hub cable sheaves reduce stress, fatigue and wear.
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
Leak proof cylinder technology only available for BendPak four-post lifts
A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
A maintenance-free electric hydraulic power system assures ultimate dependability.
All operator controls are conveniently located within easy reach.
Non-skid runways provides maximum grip, even when the runway surface is wet or oily.
Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

Overall width: 127″ / 3,226 mm
Outside length: 198″ / 5,029 mm
Overall length: 224″ / 5,690 mm
Height of columns: 88″ / 2,235 mm
Runway min height: 6-1/2″ / 165 mm
Max rise: 70″ / 1,778 mm
Max lifting height: 76-1/2″ / 1,943 mm
Width between posts: 117″ / 2,972 mm
Runway width: 19″ / 483 mm
Width between runways: 40″ / 1,016
Length of runways: 188″ / 4,775 mm
Min. wheelbase @ rated capacity: 135″ / 3,429 mm
Min. wheelbase @ 75% capacity: 115″ / 2,921 mm
Min. wheelbase @ 50% capacity: 95″ / 2,413 mm
Min. wheelbase @ 25% capacity: 80″ / 2,032 mm
Locking positions: 12
Lock spacing: every 4″ / 102 mm
Lifting time: 60 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

9,000-lb. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Multi-caster slip plates
Dual radius plate positions
heavy-duty stainless steel lifting cables
Dual-hub cable sheaves
Grease nipples on every sheave and sheave axle
Single hydraulic cylinder
Integrated hydraulic flow restrictor
Durable powser coat finish
Spring-loaded safety locks
Simple push-button lock release
Aircraft-quality stainless steel and aluminum pneumatic cylinders
Secondary lock system
Fully enclosed cables, airlines, safety latches and sheaves
Multiple adjustable height locking positions
Maintenance-free power system
Easy-to-reach operator controls
Non-skid runways

Additional Information

Lifting Capacity

Motor

Rise Time

Inside Columns

117"

Overall Width

127"

Height of Columns

88"

Length of Runways

188"

Overall Length (including drive up ramps)

224"

Outside Length (base plate to base plate)

198"

Max Rise (underneath runway)

70"

Reviews

There are no reviews yet.

Be the first to review “BendPak Closed Front Alignment Four Post Lift HD-9AE”

Your email address will not be published. Required fields are marked *