BendPak Asymmetric Clearfloor Two Post Lift, High Rise XPR-10AXLS

$3,985.00

BACK ORDER DATE DECEMBER 18TH – CALL TO CONFIRM DATE FOR NEW ORDERS

This car lift is truly something to get excited about. If your shop has the overhead clearance—at least 13’—the XPR-10AXLS might be the best lift you ever purchase. The big n’ tall techs in your shop won’t forget it!

PDF Catalog Sheet
Purchase this product now and earn 3,985 Points!
SKU: 5175991 Categories: , Brand:

Product Description

The XPR-10AXLS Offers Extended Height PLUS 75” Cylinder Stroke

10K car lifts don’t offer taller lift carriages or get easier to work under than this. If you need maximum security and an extended working height that’s ideal for taller individuals, you need the BendPak XPR-10AXLS. This particular two-post lift features an absolutely massive 75” cylinder stroke, which means we did more than just extend the columns for the sake of overhead clearance. We actually lift the bottom of the vehicle 6” higher than our standard 10K lift height. True safety in a car lift requires tall carriages; higher carriages eliminate balance issues than come into play when lifting trucks and SUVs.

Direct-Drive two-post car lift technology
The XPR-10AXLS two-post car lift offers tandem performing, low-pressure HVLP direct-drive cylinders that replace the lifting chains and screw-type mechanisms often featured on other two-post lifts. These direct-drive cylinders prevent leaks, are more reliable and run more smoothly than other systems too. Two-post lift operators generally prefer our Direct-Drive technology, as it requires fewer moving parts than chain-over lifts. Hydraulic fluid gets pressurized, starting at the power unit and flowing through the hollow cylinder rods. The downward motion of the piston rod raises the massive 75” lift carriage while dual-synchro equalizers ensure a safe, even, worry-free lift.

Two-Stage Telescoping Screw Pad Assembly Kit
BendPak’s two-stage telescoping screw pads are second-to-none in strength and durability. That’s good, because we hope you’re going to be using this car lift for decades. Gouge and tear-resistant polyurethane pads improve safety and ensure you’re not constantly replacing equipment. We even throw in a set of 63 mm stackable adapters when you purchase the XPR-10AXLS.

Low-profile, dropped-end frame contact pads
Extremely low-profile contact pads are well-suited for compacts and sport cars. The dropped-end frame design makes your two-post lift arguably the most versatile car lift ever made.

Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of wheelbases. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM-recommended pick-up points and wide and/or narrow configurations.

  • 10,000​-lb lifting capacity
  • Expandable top beam accommodates wide or narrow drive​-thru configuration
  • Double​-telescoping screw pads offer increased versatility
  • Added overhead safety shutoff bar
  • Exclusive Tru​-Metric arm design for more versatile arm positioning
  • 30° rotated single​-piece columns
  • Single​-point safety release
  • Drop​-end arms provide a lower pad height
  • Dual hydraulic direct​-drive cylinders
  • Oversized 5​9″ tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self​-lubricating dura​-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3″
  • Automatic arm restraints
  • Heavy​-duty 1/2″ aircraft​-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4​-piece 63mm stackable adapter set comes standard
  • Triple​-telescoping arm design
  • Versatile drop​-in contact pads with stackable adapters
  • ALI Approved.

A – Height Overall: 1​51″ / 3,835 mm*
B – Width Overall: (NARROW) 13​2″ / 3,353 mm .
B – Width Overall: (WIDE) 145″ / 3,683 mm.
C – Width Outside of Columns: (NARROW) 1​26-3/4″ / 3,225 mm.
C – Width Outside of Columns: (WIDE) 1​39-3/4″ / 3,555 mm.
D – Floor To Overhead Switch: 14​7″ / 3,734 mm.*
E – Inside Columns: (NARROW) 105.5″ / 2,​680 mm.
E – Inside Columns: (WIDE) 1​18.5″ / ​3,010 mm.
F – Reach (Front Arm Min.): 2​8-1/2″ / ​724 mm.
G – Reach (Front Arm Max.): 4​7-1/2″ / 1,​206 mm.
H – Reach (Rear Arm Min.): ​28-1/2″ / ​724 mm.
I – Reach (Rear Arm Max.): ​47-1/2″ / 1,​206 mm.
J – Min. Pad Height: 4.25″ – 6-3/4” / 108 mm. – 171 mm.
K – Rise: ​75″ / 1,​905 mm.
L – Max Lift Height (Pad Only): 79″ – 81″ / 2,007– 2,057 mm
M – Max Lift Height (3″ Adapter): 81.5″ – 83.5″ / 2,070 mm – 2,121 mm
N – Drive-Thru Clearance: (NARROW) 93″ / 2,362 mm
N – Drive-Thru Clearance: (WIDE) 106″ / 2,692 mm
Motor (**) 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load Per Arm: 2,500 Lbs. / 1134 Kg.

Reviews

There are no reviews yet.

Be the first to review “BendPak Asymmetric Clearfloor Two Post Lift, High Rise XPR-10AXLS”

Your email address will not be published. Required fields are marked *