Atlas Pro 7000 Four Post Lift Super Tall 7,000 Capacity PRO7000ST

$5,695.00

CALL FOR SHIPPING QUOTE

The Atlas® ST-7000 is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles.

Purchase this product now and earn 5,695 Points!
SKU: ATEXH-PRO7000ST Categories: , Brand:

Product Description

Atlas Pro 7000 Four Post Lift Super Tall 7,000 Capacity PRO7000ST

The Atlas ST-7000 is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles. The Atlas ST-7000 raises vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144 inches) under the runway.

This super tall four post storage lift uses heavy duty runways, and the extra tall lifting height gives customers the space needed to park much taller vehicles under the lifted vehicle. There are 21 locking positions in the lock ladder. The lock ladder may be adjusted during installation so that an almost infinite number of locking heights may be obtained.

A single point release toggle (located next to the power unit) automatically unlocks all four spring loaded pneumatic locks. Compressed air is required to disengage the locks (air supply not included). The emergency slack cable secondary lock system is always “on standby” and will engage automatically if the aircraft cables are compromised or becomes too slack.

 

 

  • 7,000 lb. Capacity
  • Atlas® Powder Coat Finish
  • Lifts over 12 feet high!
  • Perfect for storing above tall vehicles
  • Lock Ladder Design
  • Must be bolted to ground
  • Anchor Bolts Included
  • Reinforced runways
  • Single Point Pneumatic Lock Release
  • Double Lock Safety System
  • Emergency secondary locking system
  • 2 Year Structural, 1 Year Hydraulic Warranty
  • Shipping Weight: 2,450 lbs.

Atlas® ST-7000 Specifications
Capacity 7,000 LB
Lifting Height To Top Of Runway 147″ (12′ 3″)
Overall Length with Approach Ramps 227″ (18′ 11″)
Overall Length without Approach Ramps 205″ (17′ 1″)
Length Between Columns 185″ (15′ 5″)
Overall Width (With Motor) 123″ (10′ 3″)
Overall Width (Without Motor) 110″ (9′ 2″)
Approach Ramp Length 31″ (2′ 7″)
Total Runway Width 19″
Runway Length 194″ (16′ 2″)
Runway Thickness 4″
Width Between Runways 45″ (3′ 9)
Width Between Runway Rails 41″ (3′ 5″)
Outside Runway to Outside Runway 83″ (6′ 11″)
Clearance Under Runways 142″ (11′ 10″)
Size of Column 7″ x 4″
Clearance Between Columns 100″ (8′ 4″)
Base of the Column 11″ x 13″
Height of Columns 162″ (13′ 6″)
Maximum Wheel Base 182″ (15′ 2″)
Drive Thru (Outside of tire to outside of tire) 82″ (6′ 10″) Adjustable by 7″
Cable Diameter .375″ (3/8″)
Gauge Of Steel 5 Gauge (.2″ / 1/5″ / 5mm)
Motor 220V +/- 5% (209-231volts) 1 phase.
A 30 amp breaker is required.
Oil Requirement 6 Gallons AW32/AW46
Shipping Weight 2,450 LBS.

Locking Positions Under Runway
(+/ 2″)
23″ (1′ 11″)
29″ (2′ 5″)
35″ (2′ 11″)
41″ (3′ 5″)
47″ (3′ 11″)
52″ (4′ 4″)
58″ (4′ 10″)
64″ (5′ 4″)
70″ (5′ 10″)
76″ (6′ 4″)
82″ (6′ 10″)
88″ (7′ 4″)
94″ (7′ 10″)
100″ (8′ 4″)
106″ (8′ 10″)
112″ (9′ 4″)
118″ (9′ 10″)
124″ (10′ 4″)
130″ (10′ 10″)
136″ (11′ 4″)
142″ (11′ 10″)

Additional Information

Weight 2400 lbs

Reviews

There are no reviews yet.

Be the first to review “Atlas Pro 7000 Four Post Lift Super Tall 7,000 Capacity PRO7000ST”

Your email address will not be published. Required fields are marked *