Atlas Commercial Grade Four Post Lift ATPK-414 14,000 lb Capacity

$4,356.00

The Atlas® 414 14,000 pound capacity four post lifts are designed and built to commercial grade standards.

Purchase this product now and earn 4,356 Points!
SKU: ATPK-414 Categories: , Brand:

Reviews

There are no reviews yet.

Be the first to review “Atlas Commercial Grade Four Post Lift ATPK-414 14,000 lb Capacity”

Your email address will not be published. Required fields are marked *

Product Description

Atlas Commercial Grade Four Post Lift ATPK-414 14,000 lb Capacity

The Atlas® 414 has been manufactured to the same exacting specifications for many years. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

The Atlas® 414 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas® 414 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift.

The Atlas® 414 (14,000 LB. capacity four post lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 414 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service.

    • 14,000 lb. Capacity
    • Atlas® Powder Coat Finish
    • Air Operated Single Point Lock Release
    • Automatic Shut-Off Switch
    • Lock Ladder Column Design
    • Mounting Hardware Included
    • 5 Year Structural Warranty, 2 Year Hydraulic Cylinder Warranty, and 1 Year Power Unit Warranty
    • Shipping Weight: 3,200 lbs.

ce_approved

 

Capacity 14,000 lb.
Lifting Height 69 1/4″ (5′ 9 1/4″)
Overall Width Of Columns (Without Motor) 127″ (10′ 7″)
Overall Width Of Columns (With Motor) 139″ (11′ 7″)
Overall Length With Approach Ramp 256 1/2″ (21′ 4 1/2″)
Overall Length Without Approach Ramp 217 3/8″ (18′ 1 3/8″)
Length Between Columns 196″ (16′ 4″)
Runway Length 207″ (17′ 3″)
Runway Width 22″ (1′ 10″)
Thickness Of Runway 7″
Width Between Runways 45 1/2″ (3′ 9 1/2″)
Width Between Runway Rails 41 1/2″ (3′ 5 1/2″)
Outside Runway To Outside Runway 86″ (7′ 2″)
Clearance Under Runways 62 3/4″ (5′ 2 3/4″)
Clearance Between Columns 116″ (9′ 8 1/4″)
Height Of Columns 86″ (7′ 2″)
Maximum Wheel Base 186″ (15′ 6″)
Drive Thru 102″ (8′ 6″)
Motor/Electrical Requirement 220 Volt, Single Phase;
A 30 amp Breaker Is Recommended.
Shipping Weight 414 3,100 lb.414A 3,400 lb.

Additional Information

Weight 3400 lbs

Pin It on Pinterest