Atlas Commercial Grade Four Post Lift ATPK-412 12,000 lb Capacity

$3,791.00

The Atlas® 412 12,000 pound capacity four post lifts are designed and built to commercial grade standards.

Purchase this product now and earn 3,791 Points!
SKU: ATPK-412 Categories: , Brand:

Reviews

There are no reviews yet.

Be the first to review “Atlas Commercial Grade Four Post Lift ATPK-412 12,000 lb Capacity”

Your email address will not be published. Required fields are marked *

Product Description

Atlas Commercial Grade Four Post Lift ATPK-412 12,000 lb Capacity

The Atlas® 412 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas® 412 has been manufactured to the same exacting specifications for many years.The Atlas® 412 (12,000 LB. capacity four post lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money.

Our Atlas® lifts offer many exclusive features not found on many other competitor’s lifts. The Atlas® 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

  • 12,000 lb. Capacity
  • Atlas® Powder Coat Finish
  • Air Operated Single Point Lock Release
  • Automatic Shut-Off Switch
  • Lock Ladder Column Design
  • Mounting Hardware Included
  • 5 Year Structural Warranty, 2 Year Hydraulic Cylinder Warranty, and 1 Year Power Unit Warranty
  • Shipping Weight: 2,400 lbs.

Capacity 12,000 LB.
Lifting Height 74″ (6′ 2″)
Overall Width of Columns (Without Motor) 126″ (10′ 6″)
Overall Width of Columns (With Motor) 135″ (11′ 3″)
Overall Length with Approach Ramps 230″ (19′ 2″)
Overall Length without Approach Ramps 200″ (16′ 8″)
Length Between Columns 184 1/4″ (15′ 4 1/4″)
Runway Length 186 1/2″ (15′ 6 1/2″)
Runway Width 22″ (1′ 10″)
Thickness of Runway 5 1/2″
Width Between Runways 44 1/2″ (3′ 8 1/2″)
Width Between Runway Rails 42″ (3′ 6″)
Outside Runway to Outside Runway 84 3/4″ (7′ 3/4″)
Clearance Under Runways 68 1/2″ (5′ 8 1/2″)
Column Dimension 7″ x 5″
Base of Column 10 1/8″ x 9″
Clearance Between columns 112 1/4″ (9′ 4 1/4″)
Height of Columns 82″ (6′ 10″)
Maximum Wheel Base 175″ (14′ 7″)
Drive Thru 98 1/2″ (8′ 2 1/2″)
Column Thickness of Steel 3.5mm
Platform Thickness of Steel 5mm
Cross Beam Thickness of Steel 6mm
Cable Diameter 1/2″
Motor 2 HP 220V +/- 5% (209-231volts) 1 phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Shipping Weight 2,400 LBS.

Additional Information

Weight 2866 lbs

Pin It on Pinterest