BendPak Closed Front Alignment Four Post Lift Extended HDS14LSXE

$10,090.00 $8,440.00

HDS-14LSXE 14,000-lb. Alignment Limo Extended Length Four Post Lift

The HDS-14LSXE pulls double duty as both a legendary 14,000-lb. capacity lift and an alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize alignment convenience. Even though the vehicle is completely secure, the wheels respond to your every adjustment with virtually no resistance. Imagine: the raw lifting power of BendPak’s Best combined with a free-floating four-wheel alignment system. Your job just got easier. This model is available with optional drive-thru ramps, dip-trays and rolling jacks.

PDF Catalog Sheet
SKU: 5175172 Categories: , Brand:

Product Description

BendPak’s HDS-Series alignment lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. Designed into every HDS-Series lift is a laundry list of key features that improve safety, durability and productivity, ensuring that BendPak is the absolute best you can buy.

The HDS-14LSXE features aircraft-quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety, a second lock system acts as an automatic slack-cable device, automatically engaging in the event of an unexpected cable failure. Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the lift structure.

Dual-hub cable sheaves
Huge 10-1/2” diameter cable sheaves within the runway and cross tubes combined with massive 2-1/4” diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll spend less money in service related expenses down the road. Dual-hub cable sheaves reduce stress, fatigue and wear. Heavy-duty aircraft cable BendPak’s HDS-Series lifts feature four ½” diameter 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 pounds each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.

Built-in lubrication
Grease fittings are located on every sheave and sheave axle to help keep these critical parts well lubricated and to simplify periodic maintenance.

Hidden hydraulic cylinder
Leak proof cylinder technology only available for BendPak four-post lifts
Each HDS-Series four-post is equipped with a single 3-1/2” diameter hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications. The hydraulic cylinder features a one-piece, pilot fitted, machined steel piston wrapped with high-durometer, mechanically loaded rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001½ diametrically, to ensure superior cylinder operation and life.. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service.

Flow Restrictor
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

Durable powder coat
A durable powder coat finish can withstand harsh environments and chemical usually inspected then sandblasted. (2) All parts are washed in five-stage phosphate tanks then immediately dried, to avoid rusting. (3) All surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. (4) The parts are given a quick thinner wipe to remove any light debris or fingerprints. (5) Finished parts are hung on an electro-statically grounded conveyor line, then powder is applied using an electrostatic spray gun. (6) Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.

Large base plates
10″ x 12″ base plates provide a solid foundation for the HDS-14.

Spring-loaded safety locks
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.

Push-button pneumatic lock release
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

Secondary lock system
A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.

Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.

Adjustable height locking positions
Each column features multiple adjustable height locking positions for variable-height parking and infinite leveling. 12″ x 10″ base plates provide a solid foundation.

Electric hydraulic power system
A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach.

Non-skid runways
Non-skid runways provides maximum grip, even when the runway surface is wet or oily. Extended length approach ramps feature automatic rear wheel chocks and help when loading low ground clearance vehicles.

Longer approach ramps
These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It’s the little bit that makes a big difference.

Flexible protective conduit
Hydraulic hoses and airlines are routed through a flexible protective conduit.

Rolling bridge jacks
Optional 7,000-pound capacity rolling jacks (model RJ-7) make a great addition to increase service capacity. RJ-7 bridge jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

Lifting capacity: 14,000 lbs. / 6,350 kg
Front axle max capacity: 7,000 lbs. / 3,175 kg
Rear axle min capacity: 7,000 lbs. / 3,175 kg
Overall width: 130″ / 3,301 mm
Outside length: 243″ / 6,170 mm
Overall length: 271″ / 6,893 mm
Height of columns: 93″ / 2,362 mm
Runway min height: 7-5/8″ / 192 mm
Max rise: 70″ / 1,778 mm
Max lifting height: 77-5/8″ / 1,970 mm
Width between posts: 120″ / 3,046 mm
Runway width: 20″ / 508 mm
Width between runways: 37-1/2″ – 51″ / 952 mm – 1,295 mm
Length of runways: 229″ / 5,816 mm
Min 4-wheel alignment: 89″ / 2,261 mm
Max 4-wheel alignment: 156″ / 3,962 mm
Max 2-wheel alignment: 212″ / 5,385 mm
Min wheelbase @ rated capacity: 165″ / 4,191 mm
Min wheelbase @ 75% capacity: 140″ / 3,556 mm
Min wheelbase @ 50% capacity: 115″ / 2,921 mm
Min wheelbase @ 25% capacity: 95″ / 2,413 mm
Locking positions: 13
Lock spacing: every 4″ / 102 mm
Lifting time: 60 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Shipping weight: 3,252 lbs. / 1,475 kg
Shipping dimensions: 241″ x 23″ x 45″ / 6,121 mm x 584 mm x 1,143 mm
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.

14,000 pound lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Two runway lengths to choose
Heavy‐duty turn plates and integrated rear slip‐plates included
Multi‐position turn plate pockets
Automatic leveling system
Multiple auto-leveling locking positions
Runways include rail‐kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal “Anti-Sway” slider blocks in each column
Features oversize sheaves and heavy‐duty 1/2” aircraft cable
Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
Multi‐position safety locks in each column with push‐button safety release
Runways adjust for different tread widths and feature non‐skid surface
Optional 7,000 pound capacity bridge jacks available (Model RJ‐7)

Additional Information

Lifting Capacity

14,000 lbs.


Rise Time

60 sec.

Inside Columns


Overall Width


Height of Columns


Length of Runways


Overall Length (including drive up ramps)


Outside Length (base plate to base plate)


Max Rise (underneath runway)



There are no reviews yet.

Be the first to review “BendPak Closed Front Alignment Four Post Lift Extended HDS14LSXE”

Your email address will not be published. Required fields are marked *