Atlas® Alignment 4 Post Car Lift, Commercial Grade, 14,000 Lbs Capacity 414A

$5,856.00

The Atlas® 414A 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service.

Purchase this product now and earn 5,856 Points!
SKU: ATPK-414A-KIT Categories: , Brand:

Reviews

There are no reviews yet.

Be the first to review “Atlas® Alignment 4 Post Car Lift, Commercial Grade, 14,000 Lbs Capacity 414A”

Your email address will not be published. Required fields are marked *

Product Description

Atlas® Alignment 4 Post Car Lift, Commercial Grade, 14,000 Lbs Capacity 414A

The Atlas® 414A (14,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 414A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 414A has been manufactured to the same exacting specifications for many years.

The Atlas® 414A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

 

    • 14,000 lb. Capacity
    • Alignment Slip Plates and Turnplates
    • Turntable Color May Vary
    • Automatic Shut-Off Switch
    • Lock Ladder Column Desing
    • Diamond Plate Runway Surface
    • Acommodates A Wide Variety Of Wheelbases
    • Atlas® Powder Coat Finish
    • Air Operated Single Point Lock Release
    • Mounting Hardware Included
    • 5 Year Structural Warranty, 2 Year Hydraulic Cyender Warrany, and 1 Year Power Unit Warranty
    • Shipping Weight: 3,500 lbs.

ce_approved

 

Capacity 14,000 LB.
Lifting Height 76 1/4″ (6′ 4 1/4″)
Overall Width of Columns (Without Motor) 130 1/2″ (10′ 10 1/2″)
Overall Width of Columns (With Motor) 142″ (11′ 10″)
Overall Length with Approach Ramps 256 1/2″ (21′ 4 1/2″)
Overall Length without Approach Ramps 217 3/8″ (18′ 1 3/8″)
4-Wheel Alignment Wheelbase Maximum 172 1/2″ (14′ 4 1/2″)
Minimum 96″ (8′)
2-Wheel Alignment Wheelbase Maximum 175 1/2″ (14′ 7 1/2″)
Length Between Columns 196 3/4″ (16′ 4 3/4″)
Runway Length 198 1/4″ (16′ 6 1/4″)
Runway Width 22″
Thickness of Runway 8 3/4″
Width Between Runways 44″ (3′ 8″) *
Width Between Runway Rails 40 3/8″ (3′ 4 3/8″) *
Outside Runway to Outside Runway 83 5/8″ (6′ 11 5/8″)*
Clearance Under Runways 67 1/2″ (5′ 7 1/2″)
Column Dimension 8 1/2″ x 5 1/2″
Base of Column 12″ x 9 1/2″
Clearance Between columns 116″ (9′ 8″)
Height of Columns 86″ (7′ 2″)
Maximum Wheel Base 186″ (15′ 6″)
Drive Thru 102″ (8′ 6″)
Column Thickness of Steel 3.5mm
Platform Thickness of Steel 6mm
Cross Beam Thickness of Steel 6mm
Cable Diameter 1/2″
Motor 2 HP 220V +/- 5% (209-231volts) 1 phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Shipping Weight 3,500LB.
Ramp Length 50″ (4′ 2″)
Length of Slip Plates 67 1/2″ (5′ 7 1/2″)

Additional Information

Weight 3500 lbs